SMC Descent Control 8

The classic descender for ropework, the Figure 8 is perhaps the most widely recognized component of all vertical gear.  Exceptional control of starting acceleration, rappelling speed, and deceleration for stopping, plus light weight and tough, stainless steel wear resistant surfaces are the main features of this unique descender.  This descender performs well in repetative rappelling environments, such as rescue training.  Designed for use on ropes up to 1/2″ in size, the wide “shoulders” help to prevent formation of a girth hitch when the rappeller’s weight is off the rope.  When descending, the unweighted end of the rope does not rub against the loop of rope passing around the neck of this descender, due to it’s unique shape. Use the small, bottom hole as a Stitch plate.   As with all SMC products, welding is done by certified welders, followed by a dye penetrant inspection to insure full compliance with SMC’s stringent Quality Assurance Standards.