Fenix HL60R Rechargeable LED Headlamp w/battery, Black

Operation Instruction

ON/OFF
Press and hold the side switch for 0.5 seconds to turn ON/OFF the headlamp.

Output Selection
With the lamp on, click the switch to cycle through Turbo→Red light→Eco→Low→Mid→High.

Intelligent Memory Circuit
The headlamp remembers the last-used brightness level, the next time it is turned on, it will recall that previously used brightness level.

Battery Level Indicator
Click the switch when the lamp is off, the battery indicator will be on for three seconds:

• White LED flashes: more than 70% remaining
• White LED and two Red LEDs flash alternately: 30% – 70%
• Two Red LEDs flash: less than 30% remaining.

Low-voltage Warning
With the lamp on, the two red LEDs will flash at 1Hz when battery capacity is less than 20%. If red constant-on is being used, then the two red LEDs will flash. If white light is being used, then the two red LEDs will flash along with the white light lit on. Please recharge the lamp or change battery ASAP when warning occurs.

Charging

1. Plug the USB port of the charging cable into any USB power supplier, then uncover the anti-dust cap, plug the Micro USB port of the charging cable into the charging port of the headlamp.
2. The two red LEDs will flash simultaneously at 0.5Hz when in charging process. The normal charging time of the Fenix ARB-L18-2600 18650 rechargeable Li-ion battery is about four hours. The two red LEDs will be constant-on when charging is completely done.
3. Once charging is completed, be sure to plug the anti-dust cap covered.
4. Please recharge a stored headlamp every four months to maintain optimum performance of the battery.