Petzl VOLT LT, ANSI, full body harness, no ventral attachment

$279.95$469.95

The fall arrest and work positioning VOLT LT harness is very easily donned thanks to its EASYFIT design: a vest ensures the harness keeps its shape and the FAST automatic buckles on the waistbelt and leg loops allow the harness to be donned with both feet on the ground. The VOLT LT harness’ anatomical design and wide, semi-rigid waistbelt ensure comfort throughout the work day. It is certified to U.S. and European standards.

  • Rapid donning thanks to the EASYFIT design:
    – vest ensures the harness keeps its shape
    – FAST automatic buckles on the waistbelt and leg loops allow the harness to be very easily donned, with both feet on the ground. These buckles retain their adjustment settings between donnings.
  • Comfortable throughout the work day:
    – anatomical design is close-fitting, while giving optimal freedom of movement
    – lightweight, breathable construction
    – wide, semi-rigid waistbelt for excellent support
    – leg loop foam position can be adjusted for perfect positioning
    – side slots allow a seat to be installed for greater comfort in prolonged suspension
  • Easy to use:
    – waistbelt and shoulder straps equipped with self-locking DOUBLEBACK buckles for quick and easy adjustment
    – side attachment points can be folded down to prevent them snagging accidentally when not in use
    – stowage system for the MGO connectors on fall arrest lanyards, on each shoulder strap. In case of a fall, this system releases the MGO connectors and allows the absorber to be deployed.
    – fall indicators on the sternal and dorsal attachment points. If a fall indicator is visible after a fall, the harness must be retired.
    – equipment loops, slots for CARITOOL tool holder and TOOLBAG tool pouch allow easy organization of work tools

Specifications

  • Side attachment points: for attaching a positioning lanyard for use in double mode
  • Sternal attachment point: for attaching a fall arrest system
  • Dorsal attachment point: for attaching a fall arrest system
  • Rear waistbelt attachment point: for attaching a restraint lanyard
  • Certification(s): ANSI Z359.11, CE EN 361, CE EN 358
  • Material(s): nylon, polyester, aluminum, steel

References

References C72AFA 0U C72AFA 1U C72AFA 2U
Size 0 1 2
Waist belt 65-80 cm 70-93 cm 83-120 cm
Leg loops 44-59 cm 47-62 cm 50-65 cm
Stature 160-180 cm 165-185 cm 175-200 cm
Weight 1850 g 1895 g 2000 g
Guarantee 3 years 3 years 3 years

SEAT

  • Wide seat for working comfortably during suspension
  • Comes with two RING OPEN connectors that install in the side slots of the VOLT harnesses to distribute the load between the waistbelt and seat
  • Can be used with a spreader bar to create a central attachment point
  • Stows easily in the upper position when not in use
  • Side equipment loops allow easy organization of work tools

Specifications

  • Certification(s): CE EN 358 (with VOLT harnesses)
  • Material(s): polyester, nylon, aluminum

Fall arrest and work positioning harness for the wind power industry

The fall arrest and work positioning VOLT WIND LT harness that is very easily donned thanks to its EASYFIT design: a vest ensures the harness keeps its shape and the FAST automatic buckles on the waistbelt and leg loops allow the harness to be donned with both feet on the ground. The VOLT WIND LT harness’ anatomical design and wide, semi-rigid waistbelt ensure comfort throughout the work day. It has wear protectors on the waistbelt and below the dorsal point to limit wear when moving about inside the wind turbine tower. VOLT WIND LT is certified to U.S. and European standards.

Reviews

Reviews

There are no reviews yet.

Be the first to review “Petzl VOLT LT, ANSI, full body harness, no ventral attachment”

Your email address will not be published. Required fields are marked *

Thanks for Subscribing!

We promise not to bombard your inbox. Keep an eye out for promotional offers, discounts and events from On Rope 1.

Use code "OR125" to receive 5% OFF your first order!